In detail
Thompson’s One Coat Concrete Seal is a highly durable, stain resistant clear coating designed to seal, stabilise & protect concrete surfaces. It is idea for surfaces such as garage floors and concrete drives and pathways, it also repels water, oil, grease and fuel spills.
Preparation –Â
- Give the concrete a scrub with a stiff bristle brush
remove any dust or dirt. - Open any windows or garage doors for ventilation
- Use Thompson’s Oil & Drive Cleaner to give the concrete a good clean before application.
- Make sure any cleaners are rinsed off the concrete & it’s dry before applying One Coat Concrete Seal.
Application –
- Application is by long pile roller with coverage up to 6sq/m per litre. (coverage may vary depending on the texture & type of surface you’re coating)
- One Coat Concrete Deal It is recoatable in 4 hours and can be parked on after 8 hours.
- For best results, use on a dry day above 10°C
- For more porous concrete you might need to apply another coat after 4 hours.
See product data sheet for more information on cleaning of tools, maintenance and additional important notes.
- Size
- 5LÂ
- Application Methods
- Roller
- Coverage
- Up to 6sq/m per litreÂ
- VOC level
- HighÂ
- Thinning
- Not recommendedÂ
- Touch dry
- 1-4 hoursÂ
- Recoatable
- 5-8 hoursÂ
- Suitable for…
- Interior and exterior useÂ
- Scrubbability
- WashableÂ
- Colour
- ClearÂ
- Finish
- MattÂ
- Cleanup
- Brush cleaner or White spiritÂ
- Base
- OilÂ



Reviews
There are no reviews yet.